";s:4:"text";s:3270:"On the same note, a swimming pool that gets used often will also need long hours of cleaning. In this way, the filters are capable of capturing the bacteria and debris.
This figure together with the volume of the swimming pool can help you arrive at the length of time it would take to circulate the pool water. You would not need to run the pump constantly in most cases. It looks like Pentair changed the location of their calculator, the link has been fixed. Or, as long as necessary to keep your water warm.
Peter.
Unless you have a flowmeter you’re going to have to figure out what RPMs and runtime by some trial and error. And if possible return the inyo pool and buy someone else product . One of the most significant and easiest changes that can be made is the number of hours you run your pump for each day.
To do this adequately you need to run the filter long enough each day to pump a volume of water equal to the total volume of your pool. Usually, the problems are caused by improper maintenance—if you do nothing more than establish and maintain a proper maintenance procedure, problems are corrected and prevented. The good thing with modern day pumps (variable speed pumps) is that you can adjust the flow rate so that the pump cleans up efficiently without excessive energy consumption. It is ideal to run your pool pump for as long as it takes to circulate all of the pool water through the filtration system. The actual output will vary depending on your plumbing and pump location but the number in the manual is close enough. If you have a pool, then you almost assuredly have a pool filter pump. With some pumps and some pools, this could take up to 12 hours. Prices & offers are subject to change. The key to a properly sanitized pool is not only filtered water but also well-balanced water chemistry. You require finding a pool that has the same gallons per minute, as needed for the swimming pool. You have entered an incorrect email address!
The other thing to do is obvious but often underestimated by many- clean your pool by hand. Doing that will help you find the best pump run time that works well for your pool’s needs and your energy budget. 1. We normally suggest having a run time of 6-12 hours for filter cycles. This duration of time often depends on the size of your pool and pump. A pool surrounded by grass and trees will have much higher requirements than pool enclosed in a concrete lined courtyard, The swimming load – a young family in a warm climate compared with a retired couple in a cooler climate, Whether swimmers shower before using the pool, Whether the pool is exposed to full sun in a windy location or a shaded protected location, The length and number of bends in the plumbing between the pool and the pump/filter will effect the efficiency of the pump and hence the volume of water pumped.